Project 96'r Recipie

Ingredients:

1) Old Kona King Kahuna Ti

1) 29" front wheel

1) Avid BB7 Mechanical Disc caliper

1) On-One Superlight Fork

1) Star Nut

2) Zip ties

Bulk Cable Housing and cable

Dozen spacers gourmet or standard

Dash of single track dust to taste

Take Old Kona and carefully remove old squishy bits off of front including 26" wheel. On a clean work bench, combine On-One fork, Mechanical Disc. Take ingredients off of bench and incorporate with Old Kona. Measure rise of stem, install spacers as needed and cut fork to length. Mix star nut, cable & housing and tighten everything to spec. To finish, add 29r wheel, sprinkle with single track dust and enjoy. Makes one serving, guaranteed to make you smile.

What happens when....

....175#'s of Phataass meets a 165 gram saddle?.......

Next time, no hollow rails for FB.

What's old is new again.....

Circa ~'94/'95 TNT cranks. If only I could find my ti S-Works crank bolts....

New Year, new FB

Ok.... who am I kidding. I did better in '06 than '05 in that I did ride a bit more, and I blogged a bunch more. I dropped off the last two months of the year, but oh well. This year I'm back at it. I want to ride more, now that we're finally settled into the house, and start running (once I find a good trail or route). So not quite a New Years ride, but close enough. Some of the local guys have been building this cool new trail. Enjoy!



1st re-route... this is meant to be the up portion, but I'm a wuss and rode down it

This is the down section... it's much higher than it looks and there's no great run out. We cleaned it up a bit and added some boulders to help keep the bounce to a minimum while riding down.

Same as above, but me trying to ride up it.... I cleaned it ... yeah, that's right...

Finally some Pictures!

I've been super busy as you can tell by the lack of posts, pics, and most importantly the lack of riding! The weather in south Texas has finally dropped to a fridged 80 something degrees (I may have to break out the wool and leg warmers). The time has come to get off my duff and ride. So I thoght I'd post up some pics of my favorite haunt which is now closer to the new house. Life is good my friends.

More freaking heat!!!!

Ok, so I knew it would be hot in Texas, but this is getting silly! Here we are the first week in October and it's still in the mid 90's! I can't take it anymore. You know the expression "be careful what you wish for". Here it is. I always wanted endless summers, and here they are. Jeez.

So my boy DT is doing a bootleggers bliss event in November. Wishing I was back up in my old stomping grounds so I could be a part of the action. It sounds like a hoot, and I've been thinking of doing my own brew ever since sampling
Joe Foley's tasty goodness at the first 12hours of Lodi we all took part in... think that was '01 if memory serves me. Ah the good ole days.

I've been slacking hard core lately on the bike (I have the gut to proove it). As the title may have hinted, it's been hot... really hot. Plus with the new house and the rug rat my time is limited. I'm told by fellow fathers that this will ease with time... I hope so. If I'm lucky I get out once a week to ride, and I haven't done an epic or even so much as gone camping (see hot above). I think I'm going to have to buy a road bike to keep my fitness up there. The New Braunfels area is loaded with roadies, if I can sell the old Single Speed, BMX bike and other junk lying around I may have enough scratch to buy a cross check (close enough to a road bike for me).

Since I haven't posted any pic's in a while, I thought I'd snap some pic's of the new house, the bike, and other misc. stuff. Of course the wife let the batteries die in the camera, and I can't seem to be able to sync my razor to my blackberry to email myself the pic's I have saved on my phone, so you sucka's are going to have to wait until I can get it together enough to add some. Here are some of Ella to hold you over.

Wow, this thing is still alive!

Well, not much to say about biking. I have been slacking hard on the bike front, and more than likely won't be doing much riding for a little while. The wife finally broke me and made me buy a house, so you guessed it I've been off the bike and doing stuff for the prep. of the house. The benefit of buying a new home is there aren't a ton of things to do on the inside and nothing to worry about like hot water heaters bursting, and electrical work going south on you in the middle of the night... the downshot is that you have to worry about and think about things you never think of as a renter.... like sod, trees, shrubs... so needless to say, I've had more on my plate than I had expected. I am closer to my favorite local trail, so if I'm lucky I can get in at least two rides on the weekends, and still have time for the honey do list. Once again, I will post up pic's once I get the camera back, the wife has been holding it hostage for several months now. I'm getting so desperate that I'm taking my camera phone with me on the next ride just so I can snap some pics!

Happy riding...

Heat!

So this is our first "summer" in Texas. The first thing people tell you when you move from anywhere to anywhere else is that it's different. I got the speach from everyone under the sun about how hot it is in Texas. Well, I thought to myself, at least it's not humid. Being from DC & the east coast it's humid as hell. So I think to myself well 90 with 100% humidity is hot, how bad can 104 with almost no humidity be? Well, let me tell you, it's HOT, and not only hot but the sun is brutally intense. It's flesh scaldingly hot. I now know why "cowboys" wear those silly hats. Wow, if you're thinking of moving to Texas, do yourself a favor and come visit in June or July, you might think twice. I'm told by other transplants that I'll get used to the heat. I don't know about that. It's not so much the heat, but rather how intense the sun is. Plus it never seems to end, even on rainy days the sun is out. It's like living on another planet.

That's it for now, I'm off to feed the dogs and sneak out for a ride at my favorite trail.

Kudo's...

Thanks to all who have posted to help me out with adjustments, tips, fit etc.

Ricky-d, as you suggested I adjusted the levers closer to the bar, and although it's a little weird feeling being so close before the brakes engage, I've found that I'm actually thinking about my braking more rather than the knee jerk brake locking that I was so fond of. I'm sure the trail gods had a sigh of relief... you learned me again Ricky!

JoeP/PeterB, Thanks for the bar adjustment tips. Mine are almost parallel to the ground at this point, and I'm not feeling the hand numbness that I was in the past. I also feel much more comfortable on the climbs in this position as I'm not wrenching my wrists in a funny angle, but rather using my shoulders and full arm extensions to push/pull on the gritty stuff.

SSLOS... thank you for the fine wrap job my brotha... we must ride if you have time away from your Zen Tu Nai training.... do I owe you anything for the wrap or grips BTW?

I hope to get my hi-jacked camera back from the wife soon and will post pics of the set up, and some of the beloved Madrone trail surrounding Canyon Lake.

back to Jones'n

So I let my buddy sslos borrow my Jones bars, and had been on my Monkey lites for a while. Los liked the JJ's so much he got himself a pair of his own, and returned mine, with a nice wrap job and said.... try them like this. I did... they work... Weird.

I also took JoeP's advice and started with the bars almost level. I put a shorter stem on, and I think the combo works pretty well. So far I have two rides on them at Madrone and no numbness. I think this is going to be the keeper set up wise. Now my only real issue is my short little saussage fingers have a hard time reaching the brake levers with the break levers mounted in front of the cross bar. I know it would look dorky and cut down my hand position real estate wise, but I think I'm going to move the brake levers back and see how well I can reach them from there. I notice in all of Ricky's pic's he's able to grab the brakes while his hands appear to be pretty down low on the bars. He's either got monkey like digits, or I have girl hands... either way I'll have to post up some pics. I also have the ability to take pics again, so I'll be snapping some pics and posting again soon.

Just words....

So I haven't been on the bike since the wife and kid got back from their trip. I've also been putting in a lot of hours at work, and haven't even had time to read my favorite time suckage like MTBR, Bike Mojo, and bikecentric. I just skimmed Ricky's monster and joep's blog. I'm really missing the east coast and my biking friends, at least I can read their blogs and feel like I'm still there. Here in Tejas it's been hotter than hell. I have found a favorit trail (Madrone) and have been doing some riding and trail work while out there. The main trail guy there Joel is a cool guy from the PNW and has taken me under his wing, he's also a 29er guy and rides with toe clips! It's funny to see, but he's pretty darn good with them.

Funny, I look at my goals for this year and I'm already way behind. I'm eating like crap and not on the bike as much as I want to be. Being a new parent is difficult and is cutting into time I used to take for granted. Funny, funny thing... the wife is hitting me up for a health club membership. Maybe a gym is the perfect thing until I have more time to dedicate to the bike.

SSolo at Madrone

Well, I tried to gather the troops to go to Madrone on Saturday, as we had a great ride out there last weekend. I had a couple of replies, but in the end we just couldn't make a match up and I ended up ssolo'n it. At first I thought, I'll just bag it since no one could make it, I'm glad I decided to go. I have been riding with others since I moved down here, mainly because I still don't know the trails all that well, but mostly because I enjoy riding with other people. This was a nice change. I noticed things about the trail that I hadn't noticed before. It gives you a different perspective when you go ssolo. I didn't go very fast, yet I did better time wise than when I group ride... curious. I also felt a tremendous amount of flow. Madrone is a short trail ~8 miles, yet it's very rocky and can be quite tight and twisty in areas. You can never really bomb at Madrone, by the time you build up some good speed, you're into a rock garden, or into a switch back. It's a really nice trail, with a mix of everything, the best part of the trail system though is the constant cris crossing views of Canyon Lake. This area is part of the Texas hill country, so there are really neat peaks and valleys, and the lake is breath taking. My new mantra will be to go out at least once a month and do a solo ride. I really cleared out the cob webs and got a great work out in the process. I'm a better person after riding, more patient, more courteous, and less stressed. Life is good my friends, get out there and enjoy your surroundings.

Mary, Mary quite contrary

So I was under the weather on Friday and decided to take a half day to clear my head and sweat my cold. I ended up riding Government Canyon which is very rocky and technical, with some of the best climbing in San Antonio. Things started off well, and Tig one of the Houston Mojo's and I got started around 14:00. On our first climb, my hands were feeling rough, I could tell the difference between the aluminum and ti bars for sure.

Half way through the ride and still plenty of climbing to do, but Mary had a different agenda. I was struggling, my hands were killing me. By the time we reached the end of the ride, a nice rocky downhill with the best vista's of the canyon, my hands were toast. I could barely hold onto the bars. When we reached the truck, I had to show Tig my hands, cause I think he thought I was just a slacker... I have two huge blisters on each palm... Mary and I have since parted ways. I'm back to my EC90's, so much more comfortable.

New set up

Looks like I'm slowing down on my update... such is life.

After a tough ride with my friend Alan at Comfort I decided to order some new gears. I had been running 32x17 which was cool on my 26" bike, but isn't cutting it on climbs on the 29er. So I got a 19t and a 21t cog from speedgoat . I have to say that ordering from them when I was back east was much quicker than my current digs west of the Mississippi. Oh well, they're worth the wait. I also decided to ditch the Jones H-bar after 4-5 rides, and am now set up with a pair of Mary's. I've been waiting on Ricky to hand over some precious advice about set up, but no response... Slacker must be riding his bike or something. Anywho, I let Los borrow the H-bars and he's pretty stoked, I think Jeff should be paying me a royalty to spread the love of his bars locally. Try them before buying them kind of deal, you listening you hairy freak?

That's all for now...

1st impression of JJ H-bar

So, I rode the Jeff Jones H-bar on 4-5 rides. I wanted to love it, but it just didn't feel right. I put a longer stem on per everyone's recommendation (I normally run a 90mm Stem and put on a 110mm). First ride with the "los" at Madrone, I liked the sweep, but nothing else. 1/3 of the way through the ride, and my hands were numb. Second and third rides showed the same results, and on my final ride with Alan @ Flat Rock Ranch, I was through with them. Hands numb, and I felt that the extensions were useless. I also never rode in the position everyone said was their favorite at the junction of the extensions and the flap portion of the bar. I didn't play around with angle, or even try a different length. After much frustration and a considerable investment in a bar, I'm done.

I decided to put my 90mm stem back on and attached my EC90, rode it last night and felt very comfortable. No hand numbness, although I did miss the sweep of the Jones bar. My next move will be to slap on the Mary bars and see how I like them. I may just be a riser bar kind of guy.

Ricky, thoughts?

Hot & Hard....

Well, 3/14 is my official last day at work. That said Alan from Mojo called a ride for Friday 3/10 at Flat Rock or Comfort. Who am I to say no, and how could I resist. I had only ridden there once before, on the Gunnar, and had a pretty nasty wipe out, but really enjoyed the terrain. I met Alan at the underpass of 1604 & 10 and we carpooled out in his Saab-aru (might very well be my next vehicle).

I should have known it was going to be a bad day, we were having guests that day and I had to scramble to help "clean" the house before I left. Then I couldn't find my insurance card or ID. I decided to pick up some breakfast taco's since Alan was good enough to drive, I was in a hurry and ordered a dozen mixed variety, only to get a bag of six... damn drive through! We got to the parking lot and things were going well enough, I coughed up $12 for Alan and I, since again he was good enough to drive and lead the ride.

We started out the ride and things were fine. The niner was climbing well enough and Alan was on his super bling Ibis SS. I have been trying out the JJones H-bar, and can honestly say I'm not loving it (sorry Ricky). My hands have been going numb mid way through my rides, I'm still going to play with it a bit though. Maybe a different stem. About half way through the ride we got to the top of a ridge. I hadn't been feeling very strong and it was hotter than hell. I think I finished off my 22 oz. water bottle about 3/4 of the way through the ride and was dying. I was also in quite a bit of pain due to not having any insoles in my shoes (I take them out for the winter in order to fit thicker socks). At the end of the upper loop ~ 9 miles, I was done. The course is a figure 8 so I thought I'd tough it out, hook up with some more water and do the second part of the course as to not disappoint Alan. I killed a 16 oz water, then started drinking my 20 oz reserve. Man, this Texas sun & heat will be the death of me! Alan pulled out some grub and cold suds as I panted like a dog in summer. We chowed down, drank the fosty cold beverages and I was toast.

I think I need to get into the gym more often, hell at least 3 times a week, and I need to start running. I'm in really bad shape and need to build my base back up. I'm also going to have to get some new shoes, or at least some new insoles for the sidi's. I went to visit los on Saturday to hook up with an Ignitor and to let him borrow the Jones bar. For now I'm going back to the carbon risers to see if I'm more comfortable. I'll give them a week and then try out the Mary's. Should be a cool experiement. Oh, if you happen to read this and want to donate any old stems to me (face plat has to be removable) shoot me a note ;o)

~B

Madrone ride with the "los"

Saturday saw my first ride on the Niner Sir 9. I headed out with fellow 29er sslos. We met up at the Madrone Trail, and after looking over each others rides, we hit the trail. I was a little anxious riding with los, as he's a Colorado & Socal rider and not only rides 29er, but rides fixed! Yikes!!! He was of course very patient and even let me take a break to catch my breath and make some adjustments to the new ride. I had a great time, the 29er did really well and cleared sections that I can't get through on the Gunnar. I don't know how much was my mad skilz, the bigger wheels, or just dumb luck. I brought my camera, but didn't carry it with me, as I wasn't sure how many times I'd end up on my back and ultimately crushing the camera. As luck would have it, I had one unscheduled meeting with rock and dirt, which I was able to make look cool with my acrobatic dismount (think of Danny Nunan dismounting his 10 speed in Cadyshack, if I don't know what I'm talking about your loss!). The Madrone trail is technical, rocky, and only has minor climbs. I felt a little uncomfortable running the taller gear and think I'm going to have to get a 19t for the rear without a doubt. I'm going to hold off though and see if I'm going to be able to run a 32 or 34 up front. I can't remember what the spider is like on the TNT's that Lee is sending me (thanks again Lee). I'll have to post up the obligatory parking lot shots tomorrow as I didn't burn the pics on to a CD and loading them at home on a dial up sucks. Guess I'll have to expand my horizons and get broadband at home.



Thanks again to sslos for being patient with me and not getting pissed when I rode up on him (bad habit I've always had, just ask Gary ) Pic's to be posted tomorrow, and look out for sslos's wicked cool Wily.

Cats vs. Dogs

I stole this from over on the MOJO board, but since I don't have pics of the Niner or a ride report yet, this will have to do for now. Wow, it's been a week since my last post....

Cats vs. Dogs
As seen in a dog's diary:

7 am - Oh boy! A walk! My favorite!
8 am - Oh boy! Dog food! My favorite!
9 am - Oh boy! The kids! My favorite!
Noon - Oh boy! The yard! My favorite!
2 pm - Oh boy! A car ride! My favorite!
3 pm - Oh boy! The kids! My favorite!
4 pm - Oh boy! Playing ball! My favorite!
6 pm - Oh boy! Welcome home Mom! My favorite!
7 pm - Oh boy! Welcome home Dad! My favorite!
8 pm - Oh boy! Dog food! My favorite!
9 pm - Oh boy! Tummy rubs on the couch! My favorite!
11 pm - Oh boy! Sleeping in my people's bed! My favorite!

* * * *

As seen in a cat's diary:

Day 383 of my captivity... My captors continued to taunt me with
bizarre little dangling objects. They dine lavishly on fresh meat,
while I am forced to eat dry cereal. The only thing that keeps me going
is the hope of escape, and the mild satisfaction I get from clawing the
furniture and urinating on the bath mat.

Tomorrow I may eat another house plant. Today my attempt to kill my
captors by weaving around their feet while they were walking almost
succeeded - must try this at the top of the stairs. In an attempt to
disgust and repulse these vile oppressors, I once again induced myself
to vomit on their favorite chair - must try this on their bed, or
swallow enough thread from my captors mending basket to produce a
trailing piece of fecal matter.

I decapitated a mouse and brought them the headless body in an attempt
to make them aware of the horror that I am capable of, and to try to
strike fear in their hearts. They only cooed and condescended about
what a good little cat I was. Hmmm, not working according to plan...
Later, there was some sort of gathering of their accomplices. I was
placed in solitary throughout the event. However, I could hear the
noise and smell the food. More importantly, I overheard that my
confinement was due to my powers of inducing "allergies." Must learn
what this is and how to use it to my advantage.

I am convinced the other captives are flunkies and maybe snitches. My
proof is that the dog is routinely released and seems more than happy
to return. He is obviously a half-wit. The bird, on the other hand, has
got to be an informant, as he speaks
with them regularly. I am certain he reports my every move. Due
to his current placement in the metal room, his safety is assured.

But I can wait, it is only a matter of time...

Good call...er e-mail

So after my hysteria yesterday I had pretty much given up on the idea of having my bike for this weekend. I was sitting at home playing with ella when my blackberry buzzez. I wasn't really thinking too much about bikes, but have been expecting to hear about a job that I interviewed for, so I rushed over to see what it was all about. Turns out that my frame made it to the boys at Niner and Chris was just letting me know that my new frame was on its way to me. I am so stoked.

I did do a quick gear calculation today and have figured out that I'm going to need to get a 19t cog and maybe a 20t cog depending on where I'm riding and if Lee ever gets me my cranks. Right now I'm set up with a 32x17 on my 26" ss and this has worked really well in most applications. When I run the new cranks the set up will have to be 34x19 or maybe even 20 if I ride HCNSA again! The old TNT cranks have a 110 BCD and 34t is as small a ring as I have found. For the short term, I have my old cranks with 32t ring. If I run the 32x19 it will give me around 45.5 gear inches, a little slacker than the 48.9 I'm used to, just means I'll spin a little mor and mash less. Yikes, two cogs from king in steel will set me back 84 bones.... may have to look at other options. I wonder if the Endless Cog Kick Ass Cogs are worth the money. Hmmm so many things to get together. I'll be posting pics as soon as I get it built up (yes it will look very similar to the one already on my flickr account).

Cheers

The waiting game continues and other random shizzle

Here we are, it's Wednesday and still no word from Niner. I'm begining to worry that the frame hasn't made it to them, hopefully the idiots at the post office aren't just sitting on the frame. Problem is I didn't add a signature tracker or any such option or device. Argh! The waiting is driving me crazy. I want my new frame so bad, this sucks. In thinking over my decision I could have gone with a Walt frame with custom geometry specifically for me and my "needs" for the amount this has cost me and it would already be here in my grubby little hands. Oh well, can't think like that. Must keep the positive in mind. I love my Kermit green and once I get it built up I'll be very happy.

The whole experience has gotten my wondering about building frames. Heck the Niner boys are great to deal with, but they don't really build their own frames, they're made for them based on their standards. I've been reading a lot about fillet brazing and frame fabrication in general. There are tons of guys out there building nice hand made frames, even Kathy suggested I take a couple of welding classes. St. Phillips College here in SA offers a few good courses on Oxy-Acetylene, MIG, and TIG welding. I may have to sign up for a few classes, maybe instead of my dream of owning a bike shop, I'll start making frames and provide bike shops with quality frames... Hmmm. I think Jeff Jones got started by taking on a lacky position with GT back in the day.

That's about it for now, going to give the boys at Niner a buzz to see if the frame made it to them alright. Unless my frame was shipped today there's no chance of getting it built for a ride this weekend. Sigh!